# Litchfield Minerals Narrows Harts Range Copper-Nickel Search to Four Priority Areas After 1,100 sq km Survey

> Litchfield Minerals has narrowed its Harts Range copper-nickel search to four priority areas after a geophysical survey covering about 1,100 square kilometres.

- Published: 2026-11-19T00:59:31+00:00
- Section: Expansion
- Author: News Desk
- URL: https://newsforagent.com/news/2026-11-19/litchfield-minerals-harts-range-four-priority-areas
- Source: [TradingView](https://www.tradingview.com/news/smallcaps:928f43808094b:0-litchfield-minerals-narrows-harts-range-copper-nickel-search-to-four-priority-areas/)

## Key takeaways

- Litchfield Minerals completed a geophysical survey covering about 1,100 square kilometres at Harts Range in the Northern Territory.
- The survey identified four priority areas, IA1, IA2, MT4 and MT6, but no copper or nickel mineralisation has been confirmed.
- Managing director Matthew Pustahya said a field team heads to site this week while the company models gravity in 3D with the MT data.

Litchfield Minerals has narrowed its copper and nickel search at Harts Range in the Northern Territory to four priority areas after completing a geophysical survey covering about 1,100 square kilometres. [TradingView](https://www.tradingview.com/news/smallcaps:928f43808094b:0-litchfield-minerals-narrows-harts-range-copper-nickel-search-to-four-priority-areas/) reported the results do not yet show that any of the areas contains copper or nickel mineralisation.

## How the Harts Range Survey Was Run

Vox Geophysics carried out the surveys under the 2026 BHP Xplor program, combining measurements of underground electrical conductivity and rock density. Two of the priority areas, IA1 and IA2, follow the boundary between the Irindina and Aileron geological provinces, where faults may have channelled magma or mineral-bearing fluids. The other two, MT4 and MT6, sit in rock formations tied to unusually strong gravity readings. MT6 lies within the Riddock Amphibolite, the formation associated with the Basil copper-cobalt deposit, which Litchfield does not own.

The survey also identified a large deep conductor, MT5, from about 3 km to more than 5 km underground, beneath a prominent gravity feature and along a projected major fault. MT5 is too deep to drill directly, but its apparent relationship with shallower features could help guide exploration closer to the surface. Litchfield has sent a field team to inspect the four areas.

"We are clear that conductors have other possible explanations, and that only field work, further surveys and modelling, and ultimately drilling will tell us what is there," managing director Matthew Pustahya said. "That is why our team heads to site this week, while we model the gravity in 3D with the MT to test whether MT5 is dense—the aim is to turn the best of these conductors into drill targets and put our next dollars where the evidence is strongest."

## Litchfield Minerals' Northern Territory Ground

According to akta.pro [company records](https://akta.pro/company-data), [Litchfield Minerals](https://akta.pro/company-profiles/0056aan/litchfield-minerals) holds six granted Exploration Licences covering a combined 3,205km² in the Northern Territory within the North Australian Craton. The same records list six exploration projects: Mount Doreen (458km²), Oonagalabi (145km²), Lucy Creek (~1600km²), Paradise Well (248km²), Silver Valley (165km²), and additional tenements. The company was selected for BHP's 2026 Xplor accelerator program in February 2026, receiving US$500,000 in equity-free funding plus access to BHP technical and commercial mentors over a nine-month cycle.

## Earlier Work Across the Territory

In June 2026, Litchfield redefined its Harts Range ground as a belt-scale copper-nickel system, The Sydney Morning Herald reported. That same month, the company said it would run three ground geophysical surveys in July on its Oonagalabi and Silver Valley projects, testing a mineral systems framework from its BHP Xplor program. In June 2026, Litchfield also completed phase three reverse circulation drilling at Oonagalabi, with the best intercept at 120m at 0.35% Cu, 0.92% Zn, and 4.1g/t Ag from 52m, the Herald reported.

## What Comes After the Four Areas

Litchfield plans to model the gravity in 3D with the MT data to test whether the deep feature contains unusually dense rock. Closer-spaced surveys may help narrow the most promising areas into specific drilling targets. The company said it could eventually use the same approach elsewhere across the eastern Irindina region, depending on results, land access, tenure, and funding.

## Companies in this story

- [Litchfield Minerals company profile](https://akta.pro/company-profiles/0056aan/litchfield-minerals) · website: https://litchfieldminerals.com.au

---
News for Agent · https://newsforagent.com/llms.txt
